Three Minutes to Understand the Presswood Pallet Production Process

Presswood pallet, with its high strength, high durability and environmental protection characteristics, occupies an important position in the field of logistics transfer and storage. The presswood pallet production process combines modern technology and green concepts, mainly through the crushing, drying, glue mixing, hot pressing, sanding and other key links, the following is the specific introduction of presswood pallet production process:

Step 1: Precise crushing

Raw materials such as wood chips and plant straw are fed into the wood crushing machine evenly through intelligent silos, and the chain plate conveying design ensures the continuity and stability of the feeding process. At this stage, a variety of crushing equipment can be flexibly selected according to the characteristics of the raw material, providing a uniform and fine wood chip substrate for the subsequent process.

Step 2: Efficient drying

The crushed material is then fed into a specialized drum dryer. This equipment is specially designed according to the type of material, equipped with heat source, feeding, drum, discharge and induced air systems, which can reduce the humidity to less than 5%, ensuring the quality and efficiency of the subsequent processing, and reducing energy consumption at the same time.

Step 3: Intelligent glue mixing

The dried raw materials are sent to the automatic glue mixing machine through the conveyor belt. The machine is equipped with a weighing platform for precise measurement. Relying on the advanced silo management system and the MDI glue supply unit, the machine automatically matches the proportion according to the predetermined ratio, and through the precision-controlled conveying and mixing procedures, it realizes the uniform mixing of raw materials and glue, which lays the foundation for the molding process.

Step 4: Precision molding

The mixed raw materials are finally sent into the hot pressing mold. This stage adopts high-temperature and high-pressure technology to complete the molding of panels and supporting feet in one go, ensuring a solid structure, smooth surface and strong load-bearing capacity of the presswood pallet. The whole process is not only efficient and fast, but also ensures the uniformity and reliability of the product.

Step 5: Full inspection and polishing

The finished presswood pallet will be subject to strict full inspection. The staff will carefully check every detail of the pallet, including the surface flatness, whether the corners are sharp, whether there are cracks or defects, etc., and do the corresponding treatment to ensure that the product meets the quality standards.

The presswood pallet production process of presswood pallets integrates the advantages of modern engineering technology and automation control, which not only improves the production efficiency, but also guarantees the high quality and environmental protection standard of the products, contributing to the green development of the logistics transfer industry.